Installing Our New 240V/Level 2 Voltec Charge Station (Phase II)

This is a follow-up to my previous post, Chevy Volt Metered Charging (Phase I). In the first phase, I ran a new dedicated circuit from the subpanel in my garage to the opposite wall to connect a 120V charging station.  In this phase, I removed the existing receptacle, rewired for 240V, installed the Voltec Level 2 charging station, and wired the kWh meter inline. It’s not my intent to write a full set of instructions for installation here.  The purpose of this post is to illustrate some of the installation steps with real-world pictures, which are somewhat hard to come by online (the pictures are rather small, but you can click on any of them for a larger version). As … Continue reading

Chevy Volt Metered Charging (Phase I)

Chevy Volt 120V Charger Mounted on the Wall

My wife and I recently brought home a brand new Chevy Volt (named “Sparky“), the plug-in electric hybrid vehicle (PHEV) from Chevrolet.  It’s a really cool car, and you can read about our first experiences with it here. Of course, the whole point point behind a PHEV is the actual plugging in.  The Volt comes with a 120V charger that plugs into your average 15A receptacle, and can fully charge the car in about 10 hours. Chevrolet’s charging station partner, SPX, sells a variety of Level 2 charging stations compatible with the Volt (and most plug-in electric vehicles, including the Nissan Leaf).  The Level 2 charging stations use 240V, and can charge the Volt in about 4 hours.  We’re going to be … Continue reading

Stupid, Angering Garage Door Opener Project

“An automatic garage door opener makes you feel like you’re working in a futuristic wonderworld”.  – Frank Ormand, Pretzel Magnate With the purchase of Amanda’s new Volt, I had to get the garage ready for a permanent resident.  She had kept her old Saab in the driveway, so I pretty much had the run of the place until now.  Protection from the elements aside, the garage is just a logical place to stick an electric car whilst it’s charging. And my father raised me on automatic garage door openers, so I figured installing one would be the right thing to do. Here’s a before picture of the garage: Nothing to laugh at, I suppose.  But the stupid door would just … Continue reading

Garage Subpanel with EMT

I have a 1 car attached garage (about 25×12) that I’ve been using for various projects. I’ve been wanting to upgrade the electrical since I moved in about 7 months ago, and I figured I’d do it in EMT. It’s rather stupid because the wall I’m installing most of the conduit on is adjacent to the house — however it’s framed separately, and there is a ~2″ gap between the back of the framing and the side of the house. It would make a perfect wiring chase for NM-B, making the job a hell of a lot cheaper and easier. But I wanted EMT because, well, for fun. It looks cool too. This is the first project I’ve ever piped … Continue reading